Description
REPLACED THE XPR-10AS, XPR-10AS-LP, XPR-10S, XPR-10S-LP
A New Paradigm in Lifting

BendPak’s all-new AP series of two-post lifts are a revolutionary design that factors the best qualities of today’s two-post lift types into a completely new concept in car lift engineering. The result is a lift unlike any other on the market, purposefully designed for extreme use, high loads and operator efficiency.

Forecasters are projecting Electric Vehicles (EV’s) to account for a large percentage of all vehicles produced and sold in the future and EV’s weigh considerably more than traditional gasoline or diesel powered vehicles. Those extra pounds have important implications for mechanic safety when these vehicles are raised in the air for service. Extra vehicle weight induces a lot more stresses and forces on automotive lift components, especially when two-post lifts are being considered. With the emergence of heavier vehicles as the impetus for the new 10AP design, BendPak engineers focused on the use of higher tensile-strength steels for the swing arms and other critical load-holding components, and the introduction of safety-critical design enhancements throughout.

Automatic Arm Restraint System (AARS) Prevents Unplanned Movement

The new Automatic Arm Restraint System (AARS) is designed to ensure safety at all times, minimizing the risk of vehicle fall accidents during the lift use and vehicle service operations. The heavily forged-steel design of the AARS secures the lift arms firmly in place, preventing unplanned swing-arm movement during lift use and vehicle service operations. With a constant restraining force applied on the swing arms during all lifting p, accidental arm creep resulting in sudden arm shift and unplanned rapid extraction, the leading contributing factor in vehicle falls, is safely mitigated.

Model
10AP
10AP-168
10APX
10APX-168
Capacity
Lifting Capacity: (*)
10,000 lbs. (4,536 kg)
Rise
A – Lowered Pad Height
4.5” (114 mm)
B – Max. Lifting Height
80.5” (2,045 mm)
86.5” (2,197 mm)
C – Lowest Lock Position
24” (610 mm)
D – Top Lock Position
73” (1,854 mm)
79” (2,007 mm)
Time to Full Rise
45 seconds
Height Overall
E – Height Overall
145” (3,683 mm)
168” (4,267 mm)
157” (3,988 mm)
181” (4,597 mm)
F – Width Overall
139” or 147” (3,531 mm or 3,734 mm)
G – Outside Column Width
128” or 136” (3,251 mm or 3,454 mm)
Inside Column Width
H – Inside Columns
109” or 117” (2,769 mm or 2,972 mm)
I – Drive-Thru Clearance
92” or 100” (2,337 mm or 2,540 mm)
J – Floor To Overhead Switch
140” (3,556 mm)
163” (4,140 mm)
152” (3,861 mm)
176” (4,470 mm)
Arms & Pads
K – Front Arm Reach (Short)
24” – 47” (610 mm – 1,194 mm)
L – Rear Arm Reach (Long)
31.5” – 59” (800 mm – 1,499 mm)
Max Load Per Arm
2,500 lbs. (1,134 kg)
Electrical
Motor
220 VAC / 60 Hz. / 1Ph
Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.