M6K + Tall Adapters + Frame Cradle Pads + Oil Drain + Adjustable Creeper
The Patented One-of-a-Kind MaxJax® Portable Car Lift
 Empty heading
Safety Features from the Ground Up

No one in the industry has a more sophisticated and comprehensive research and quality control program than MaxJax, and our thousands of customers worldwide prove it.
Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs.
Hydraulic cylinders feature integrated velocity-fuse safety valves.
A cast iron gear flow divider provides precisely equalized lifting for uniform division of hydraulic power.
Rugged safety lock bars are capable of holding three-times the rated lifting capacity.
Arm restraints automatically engage each time the lift is raised.
Detailed installation, maintenance and safety instructions accompany each MaxJax car lift.
MaxJax encourages all owners to know their equipment and to follow good safety practices when using any of our products. Your MaxJax car lift equipment has been designed and built with your safety in mind, but the ultimate responsibility for safe operation is with you, the operator.
ALI Certified

MaxJax is protected by one or more patents or claims of patents in the U.S. and elsewhere. This is provided to satisfy the virtual patent marking provisions of various jurisdictions, including the virtual patent marking provisions of the America Invents Act, as codified in 35 U.S.C. § 287(a).
PATENT NO. US 8.256.577 B2 and PATENT NO. US 9.150.395 B2


Benefits of the MaxJax
It’s the features you get that set the MaxJax apart from the rest. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new car lift. Read through the long list of features this car lift has to offer and you’ll easily come to the conclusion that the MaxJax is no ordinary garage lift.

Clear undercar access
No other low-rise or mid-rise lift system provides more under-car clearance and unobstructed floor space than the MaxJax lifting system. Now you can easily access engine undersides, transmissions, drive-shafts, starters, differentials or anything else requiring under-car access.

A two-post car lift with built-in wheels that allows you to use the lift when you need it, then conveniently store it out of the way when not in use keeping your garage and vehicle lanes clutter-free.

Stow to go in less than 15-minutes
Internally threaded recessed drop-in anchors and quick-connect/disconnect hydraulic couplers provide for fast and simple set-up. NOTICE: Before drilling into post-tension garage floors, always consult a building engineer for determining cable locations and where to avoid drilling.

Works like magic
A cast iron gear flow divider is the heart of the MaxJax® system, providing precisely equalized lifting. The specially designed flow divider/combiner is a positive-displacement fluid control device with precise flow division of hydraulic power from one column to the other even if load balance pressures change.

Mobile power unit cart
Our standard mobile power unit cart is small enough to be stored out of the way and features a storage area for the hydraulic hoses. The hydraulic power unit uses a dual voltage single-phase motor that requires 110-volts AC and a 25 amp breaker, or 208-230 volts AC and a 30 amp breaker. The industrial grade power cord is 6-Ft. long. A simple push-button switch raises the lift and a push lever controls the lowering. Simple quick-disconnect hoses can be positioned easily for single or dual column operation.

Adjustable lifting arms and stackable adapters
Increases overall arm positioning for lifting a variety of different vehicles that have Uni-body construction, OEM recommended pick-up points, or wide and/or narrow frame configurations. Every MaxJax order includes the low and medium stackable adapter sets.

Low-profile arms
Fit under the lowest compact and sport vehicles or custom motorcycles with lowered frames.

Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.

Maintenance-free slide blocks
Rather than using roller bearings that need constant lubrication and maintenance, we use futuristic full-floating UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.

Single-piece columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Direct-Drive technology
By utilizing two low-pressure HVLP Direct-Drive cylinders, we’ve eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability, smoother operation and less maintenance.

Industrial-grade hydraulic cylinders
Integrated into every MaxJax® hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001″ diametrically, to ensure superior cylinder operation and life.

Two lifts in one
Our optional motorcycle adapter kit allows you to safely lift motorcycles, ATV’s or other motorized vehicles to a comfortable working height.


Lifting Capacity
6,000 lbs. (2,722 kg)

Max Load Per Arm
1,500 lbs. (680 kg)

A Height Overall
89.5″ (2,273 mm)

B Height of Column
64″ (1,626 mm)

C Min. Pad Height
4.5″ (114 mm)

D Max Lift Height (Pad Only)
47.5″ (1,207 mm)

E Max Lift Height (With 3″ Adapter)
50.5″ (1,283 mm)

F Arm Reach (Min – Max)
26″ – 40″ (660 mm – 1,016 mm)

G Typical Width (Outside of Base Plate)
105″ – 135″ (2,667 mm – 3,429 mm)

H Drive-thru clearance
74″ – 104″ (1,880 mm – 2,642 mm)

Locking Positions
7 (every 3″)

110-220 VAC / 50-60 Hz. / 1 Ph. (20A/25A Breaker)

Time of full Rise

Individual Column Weight
300 lbs. (136 kg)

Shipping Weight (Standard Model)
960 lbs. (435 kg)

Reviews (0)


0 Product Ratings

Review this product

Share your thoughts with other customers

Write a review


There are no reviews yet.