Package Deal: (1) DT-50 + (1) MB-240X (Balancer Mounts to Changer Tower)
Take advantage of Dannmar’s value packaged deals. This Dannmar tire changer and wheel balancer package consists of a DT-50 tire changer with a swing arm and a DB-70 wheel balancer. The DT-70 tire changer controls are mounted upfront and logically arranged for both speed and ease-of-use. The tire changer is designed to handle the needs of on-the-go shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging allow wheels.
The Dannmar DB-70 wheel balancer works on wheels up to a 28″ diameter. It is very accurate and a dependable no-frills balancer that features proprietary Digital Sensor Technology for critical reliability and repeatability. Dannmar’s wheel balancer automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that show the correct amount and location of weights in just six seconds. And best of all this special package provides more for less.


DT-50 Features

Alloy steel mount and demount head w/protective plastic covers
Traveling drop-center, top-mount helper/swing-in bottom helper disc
High Torque Electric Turntable
Adjustable Internal Rim Clamping – Capacity – 12” – 26” (305 mm – 660 mm)
Maintenance-free gearbox
Aluminum pneumatic cylinders
High-pressure polyurethane pneumatic tubing
Enhanced bead Breaker Blade
Turbo-Blast Bead Seater
Inflation Gauge with Integrated Air Dump Valve
Tool Tray/Storage
Soap Bucket
Enhanced Bead Breaker Blade
Optional motorcycle clamps
Air Regulator
Inflation restraint
Forged steel foot pedals

MB-240X Features

Basic dynamic wheel balancing function
Balance an entire set of wheels
Check the dynamic balance of suspected out-of-balance wheels
Low-cost of ownership
Computerized electronic data display for each balance
Easy to use
Good companion equipment to a Dannmar Tire Changer
Quiet operation
Perfect for small garages, car-hobby garages, or a backup
Works well on many trailer wheels too


DT-50 Specifications

110-VAC, 50-60 Hz, 1-Ph

Drive System Type
Electric / Air

Tower Design
Rigid Fixed / Swing Arm

Power Assist Tower
Not Equipped

Bead Seating System
Turbo Blast / Bead Seating

Air Requirement
110-175 PSI (8-10 BAR)

Wheel Clamping Method
4 Clamps – Internal / External

Table Clamping System
Dual Pneumatic Cylinders

Bead Breaking System
Pneumatic Blade

Tower Design

Internal Rim Clamping Capacity
14” – 26” (356 mm – 660 mm)

External Rim Clamping Capacity
12” – 24” (305 mm – 610 mm)

Turntable Rim Width Capacity
3” – 15” (76 mm – 381 mm)

Bead Breaker Rim Width Capacity
3” – 14” (76 mm – 356 mm)

Maximum Tire Diameter
49” (1,245 mm)

<70 dB MB-240X Specifications Power 110 VAC, 50-60 Hz, 1-Ph Cycle Time 7 seconds Balancing Modes Multiple ALU Modes Drive System Ball Bearing / Manual Wheel Braking Hand Brake / Manual Cones Included Standard Cone Set Max. Tire Diameter 31.5” (800 mm) Max. Tire Weight 150 lbs. (68 kg) Wheel Diameter Capacity 12” – 24” (305 mm – 610 mm) Wheel Width Capacity 4” – 15” (102 mm – 381 mm) Balancing Increments 0.25 or 0.01 ounce Balancing Speed 140 RPM Accuracy +- 1 Gram (.035 oz)

Reviews (0)


0 Product Ratings

Review this product

Share your thoughts with other customers

Write a review


There are no reviews yet.