The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bulletproof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models. Whether you are an automotive shop or working on personal vehicles from your home, the PV10PX is the industry standard!
The commercial grade Atlas® PV10PX two post lift includes some modifications and improvements that make it one of the most popular above ground lifts in the world.
This lift is the perfect choice for use in either a large commercial service department or for the “pole barn” owner who wants the “biggest and baddest” lift in the country. The Atlas® PV10PX is designed and engineered to safely lift (and work on) everything from a Smart Car® to a one ton diesel dually.  This lift incorporates a padded shut-off bar to protect the top of the vehicle from contacting the crossbar. The carriages are equipped with rubber protective covers (size may vary) to help prevent the vehicle’s doors from damage if opened into the columns or carriages.  The PV10PX also includes a deluxe truck adapter set (12 pieces vs. the standard 8 pieces) and the rubber lift pad that has been reinforced to ensure a solid contact with the vehicle’s lifting points.

10,000 lb. capacity
Commercial Grade
Adjustable Height – 11′ 11 1/8″ or 12’3″
Asymmetric/Symmetric Arms
Automatic Arm Restraints
“Padded” Shut-Off Bar
Padded Carriages
Single Point Lock Release
Direct-Drive Cylinders
Powder Coat Finish
Free 12 Piece Truck Adapter Set
Mounting Hardware Included
Shipping Weight: 1,905 lbs.
5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Atlas® ATTD-PV10PX Specifications

10,000 LB.

Overall Height
143 1/8″ (11’ 11 1/8”) or 146 7/8” (12’ 2 7/8”)

Overall Floor Width
137 1/2″ (11’ 5 1/2”)

Outside Column to Outside Column
125″ (10’ 5″)

Maximum Lift Height (Without Adapters)
71 7/8″

Maximum Lift Height (With Adapters)
82 7/8″

Minimum Arm Height
4 3/8″

Inside Column
110 3/8” (9’ 2 3/8”)

Drive Thru
96” (8’)

Column Size
7 1/2″ x 14 1/2″

Column Thickness of Steel

Base Of Lift
17 1/2″ x 20 1/2″

Motor/Electrical Requirement
220 volt single (1) phase.

A 30 amp breaker is recommended

Oil Requirement
3-5 Gallons AW32/AW46 (NOT INCLUDED)

Shipping Weight
1,905 LBS.

Adapter Heights
4 Each 2”, 3”, 6”

Arm Hole/Adapter Peg Size

Requires a minimum of 4″ of concrete with a 3000 psi. rating

Reviews (0)


0 Product Ratings

Review this product

Share your thoughts with other customers

Write a review


There are no reviews yet.